Skip to main content

Lace Damask Wallpaper – Metallic FX 2 Collection

Price range: £49.95 through £51.95 (Inc. VAT)

A4 samples are available to order.


Wallpaper Calculator
Wall width (m)
m
Wall height (m)
m
Roll width (m)
m
Roll length (m)
m
An intricate, lace-like damask with layered scrolls and medallions, highlighted in metallic ink. It brings a touch of grandeur to bedrooms, dining rooms and hallways, and looks especially striking in the darker colourways.
  • Metallic paper wallpaper with a textured finish
  • Offset (half-drop) match, 21.3 cm repeat
  • Spongeable and wet removable
  • Paste-the-wall for quicker, easier hanging
  • 10.0m × 53cm roll (covers about 5.3m²)
  • Good lightfastness
  • Available in Cream, Silver, Gold, Blue and Black
Width53.0 cm (1 ft 8.87 in)
Length10.0 m (10 yd 2 ft 9.7 in)
Area5.3 sqm (6.3 sq yds)
Repeat21.3 cm (8.4 in)
MatchOffset
Surface TypePaper
FinishTextured
WashabilitySpongeable: marks can be removed by gently dabbing with a damp sponge. Avoid rubbing or detergents.
RemovabilityWet Removable: soak the wallpaper with warm water and it can be scraped off when redecorating.
LightfastnessGood: the wallpaper tolerates normal daylight and is less likely to fade over time.
ApplicationPaste-The-Wall
Fire RatingD-s3,d2

Hanging Instructions – Paste the Wall Wallpaper

  1. Prepare the Surface: Ensure walls are clean, dry, smooth, and free from dust, grease, and old adhesive. Remove loose paint, fill cracks, and sand if needed. Seal porous surfaces with a suitable primer.
  2. Check the Rolls: Before starting, check all rolls for batch numbers, colour consistency, and defects. Do not hang if any faults are found.
  3. Measure & Cut: Measure the wall height and cut lengths, allowing extra for trimming at the top and bottom. Match the pattern before cutting additional drops.
  4. Apply Adhesive: Apply a suitable paste-the-wall adhesive directly onto the wall using a roller or brush. Cover an area slightly wider than one drop.
  5. Hang the First Length: Use a plumb line or level to ensure the first drop is straight. Apply the dry wallpaper directly onto the pasted wall.
  6. Smooth the Paper: Smooth from the centre outwards using a wallpaper brush or smoother to remove air bubbles.
  7. Trim Excess: Trim the excess wallpaper at the top and bottom using a sharp blade and a straight edge.
  8. Join the Seams: Butt edges together carefully without overlapping. Ensure seams are neatly aligned and firmly pressed down.
  9. Clean the Surface: Wipe away any paste immediately with a clean, damp sponge. Avoid scrubbing.
  10. Allow to Dry: Let the wallpaper dry naturally. Keep the room ventilated and avoid extreme temperatures.

Orders placed before 12 pm will be delivered within 2–3 working days. Orders placed after 12 pm will be processed the next working day.

Reviews

There are no reviews yet.

Be the first to review “Lace Damask Wallpaper – Metallic FX 2 Collection”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping
0