Shimmer Plain Wallpaper – Metallic FX 2 Collection
SKU: N/A
Categories: Wallpapers, Galerie Wallcoverings, Metallic FX 2, Patterned Wallpapers
Brand: Galerie Wallcoverings
£49.95 – £51.95Price range: £49.95 through £51.95 (Inc. VAT)
A4 samples are available to order.
A smooth plain with a delicate, very fine weave and a mottled metallic shimmer. The simplest way to bring a little glamour to any room, and a perfect partner for the patterned designs in the collection.
- Metallic paper wallpaper with a flat finish
- Free match – no pattern to line up
- Spongeable and wet removable
- Paste-the-wall for quicker, easier hanging
- 10.0m × 53cm roll (covers about 5.3m²)
- Good lightfastness
- Available in Ivory, Champagne, Sand, Silver, Teal and Taupe
| Width | 53.0 cm (1 ft 8.87 in) |
| Length | 10.0 m (10 yd 2 ft 9.7 in) |
| Area | 5.3 sqm (6.3 sq yds) |
| Repeat | 0.0 cm (0.0 in) |
| Match | Free |
| Surface Type | Paper |
| Finish | Flat |
| Washability | Spongeable: marks can be removed by gently dabbing with a damp sponge. Avoid rubbing or detergents. |
| Removability | Wet Removable: soak the wallpaper with warm water and it can be scraped off when redecorating. |
| Lightfastness | Good: the wallpaper tolerates normal daylight and is less likely to fade over time. |
| Application | Paste-The-Wall |
| Fire Rating | D-s3,d2 |
Hanging Instructions – Paste the Wall Wallpaper
- Prepare the Surface: Ensure walls are clean, dry, smooth, and free from dust, grease, and old adhesive. Remove loose paint, fill cracks, and sand if needed. Seal porous surfaces with a suitable primer.
- Check the Rolls: Before starting, check all rolls for batch numbers, colour consistency, and defects. Do not hang if any faults are found.
- Measure & Cut: Measure the wall height and cut lengths, allowing extra for trimming at the top and bottom. Match the pattern before cutting additional drops.
- Apply Adhesive: Apply a suitable paste-the-wall adhesive directly onto the wall using a roller or brush. Cover an area slightly wider than one drop.
- Hang the First Length: Use a plumb line or level to ensure the first drop is straight. Apply the dry wallpaper directly onto the pasted wall.
- Smooth the Paper: Smooth from the centre outwards using a wallpaper brush or smoother to remove air bubbles.
- Trim Excess: Trim the excess wallpaper at the top and bottom using a sharp blade and a straight edge.
- Join the Seams: Butt edges together carefully without overlapping. Ensure seams are neatly aligned and firmly pressed down.
- Clean the Surface: Wipe away any paste immediately with a clean, damp sponge. Avoid scrubbing.
- Allow to Dry: Let the wallpaper dry naturally. Keep the room ventilated and avoid extreme temperatures.
Orders placed before 12 pm will be delivered within 2–3 working days. Orders placed after 12 pm will be processed the next working day.











Reviews
There are no reviews yet.