Wallrock Mould Away Remediation Kit
£39.95 (Inc. VAT)
NEW PRODUCT RELEASE.
WALLROCK MOULD AWAY REMEDIATION KIT
Two-stage mould treatment system: Combines Stage One Organic Mould Treatment with Stage Two Mould Treatment.
Removes visible mould: Stage One helps remove mould and associated surface contaminants.
Targets mould roots: Stage Two is designed to treat underlying mould growth beneath the surface.
No-rinse formula: No water rinsing is required after treatment.
Convenient spray application: Easy-to-follow application process with gentle brushing.
Ready for redecoration: Once fully dry, treated surfaces can be redecorated if required.
Odourless formulation: Designed for convenient indoor application.
Take control of unwanted mould with the Wallrock Mould Away Remediation Kit, a complete two-stage mould treatment system designed to remove visible mould and treat underlying mould roots. Unlike conventional surface-only mould treatments, Wallrock’s two-stage system is designed to penetrate surface micro-cracks and target mould growth beneath existing paint surfaces. Our system is free from bleach and harmful chemicals, non-flammable, pet friendly and odourless so you don’t need to leave the room or building whilst it takes effect, saving you time, money and inconvenience. The kit will cover an entire room or that the kit treats over 7-10 times more surface area than competing brands, making it fantastic value for money. Our kit also provides scientifically proven ongoing efficacy against mould reinfestation long after the products have dried.
WHAT’S INCLUDED?
Everything you need to get started with your mould remediation project:
- 2 x 750ml Mould Treatment Bottles – Stage One Organic Mould Treatment and Stage Two Mould Treatment Application Guide – with step by step illustrations
- Protective Gloves – For added protection against the mould and other organisms during application
- Protective Face Mask – For added protection against the mould and other organisms during application
- Dustpan and Brush – For gently working the treatment into affected surfaces and collecting contaminants
- Niche Brush – For small areas
- Bin Liner – For disposing of collected mould contaminants and used protective equipment
- Cleaning Cloths – For wiping away surface contaminants and excess residue after stage one has dried
SAFETY PRECAUTIONS
Read label before use
IF ON SKIN: Adverse reactions are not anticipated in normal handling and use. However, should a reaction occur, then wash the affected area with clean water and seek medical advice.
IF IN EYES: If irritation occurs, cautiously rinse eyes with lukewarm, gently flowing water for 5 minutes, while holding the eyelids open. If eye irritation persists, seek medical advice
IF INGESTED: Rinse mouth with plenty of water. Do NOT induce vomiting. If you feel unwell or concerned, seek medical advice/attention. Avoid release to the environment.
STORAGE: Store in original container, keep container tightly closed when not in use to avoid biological depletion due to exposure to air. Protect from extreme temperatures and direct sunlight. Do not freeze.
PRODUCT COMPATIBILITY: For safety reasons and maximum efficacy Pathogon products should not be mixed with other chemicals.
KEEP OUT OF REACH OF CHILDREN.
APPLICATION
Using PATHOGON ECO MOULD AWAY STAGE ONE ORGANIC, spray the solution directly onto the affected area at a rate of around 20-40ml per sq.m (depending on the level of contamination found on the surface) plus a radius of around 1 sq.m around the area.
Using the dustpan brush gently rub in a circular motion to work the solution into areas of visible mould on the surface, no need for scrubbing. Repeat application spraying and brushing if necessary, until all traces of mould are removed.
Allow to dry naturally (1-2 hours) or use a hot air drier to accelerate the drying being careful not to overheat the surface. Once fully dry, wipe the surface with the green, clean microfibre cloth to remove any surface contaminants or excess residue.
Do not wet the surface, no rinse formula
To treat the roots of the mould, PATHOGON MOULD AWAY STAGE TWO should be sprayed directly onto the surface and allow to dry. Once fully dry the surface is protected and can be redecorated if necessary.
It is natural for some moulds, in particular black mould, to leave a residual stain. MouldAway removes the mould but may not affect the stain, visit our website for advice on removing residual stains. Redecoration may be required.
Using the dustpan and brush, collect all contaminants and put them in the refuse bag provided, include your gloves and mask when finished. Dispose of along with your regular refuse.
DELIVERY
Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.
Orders placed after 1:00pm will be dispatched on the next working day.
We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.
