Anaglypta Tudor – RD392 Original

Elegant Textured Design for Timeless Style

Anaglypta Tudor RD392 Original wallpaper brings a refined, classic texture to your walls. Its subtle embossed pattern enhances any room by adding a tactile dimension and visual interest. Whether you prefer traditional decor or a modern twist, this wallpaper offers versatility that complements a wide range of interior styles.

Durable Vinyl for Long-Lasting Beauty

Crafted from high-quality vinyl, Tudor RD392 withstands everyday wear and tear effortlessly. It resists scuffs, stains, and minor damage, maintaining its fresh appearance over time. Moreover, the wipe-clean surface ensures easy upkeep, helping you keep your walls looking immaculate with minimal effort.

Customise with Paint to Match Your Vision

One of Anaglypta Tudor RD392’s key advantages is its paintable surface. You can easily apply your favourite colours to suit your personal taste and room ambiance. After painting, the textured pattern remains beautifully defined, adding a unique character to your walls while allowing full creative freedom.

Conceals Imperfections for a Smooth Finish

Thanks to its embossed design, this wallpaper hides small wall cracks, dents, and irregularities effectively. This feature reduces preparation time and provides a smooth, flawless finish. Additionally, it adheres well to various surfaces, ensuring an easy and successful installation.

Why Choose Tudor RD392?

In summary, Anaglypta Tudor RD392 combines elegance, durability, and flexibility. It adds a timeless texture to your walls while offering practical benefits like paintability and easy maintenance. Ideal for any room, it allows you to create a stylish, polished interior that lasts. Choose Tudor RD392 Anaglypta Original wallpaper to refresh your home with classic charm and enduring quality.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 5cm
Suitability: Walls

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Please note this product is manufactured using traditional methods and materials and has a high paper content compared to Vinyl wallpapers and as such a long soaking time is required of 15 minutes so that full expansion takes place before attempting to hang the paper.
• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry. • Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive suitable for heavyweight wallcoverings and apply evenly. Typical consumption should be a minimum of 1 KG per roll but please follow the adhesive manufacturers guidance.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the fi rst strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to fl oor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

3. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

4. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.