Anaglypta Spencer – RD0151 Supaglypta

Bold Heritage, Built to Last

The Anaglypta Spencer RD0151 Supaglypta wallpaper is an ideal choice for anyone seeking timeless style and impressive durability. Designed with a rich, traditional motif, this wallpaper captures the ornate flair of period décor while delivering the modern strength needed for everyday use. From Victorian restorations to contemporary feature walls, it suits a wide range of interiors.

Durable Supaglypta Construction

Built using the advanced Supaglypta method, Anaglypta Spencer RD0151 features a double layer of heavyweight paper bonded together to form a deeply embossed, hard-wearing surface. This unique construction resists knocks, scuffs, and surface wear, making it an excellent option for high-traffic areas such as hallways, staircases, and reception rooms.

Customise with Paint

Spencer RD0151 comes in a pure white finish that’s ready to be painted. Whether you want to enhance its classic look with warm neutrals or go bold with deep colour tones, this wallpaper gives you full creative control. Its strong emboss holds detail even after multiple coats, letting the pattern shine through beautifully.

Easy to Apply and Maintain

Although highly durable, this wallpaper remains easy to work with. It cuts cleanly, hangs well with standard wallpaper paste, and conforms easily to surfaces. Once installed, you can paint it to suit your scheme, then wipe it down gently for fuss-free maintenance.

A Statement Finish for Any Room

Thanks to its ornate pattern and robust build, Spencer RD0151 works just as well in elegant living rooms as it does in grand hallways or commercial spaces. Use it to create a feature wall, or apply it throughout a room to add richness and depth. Its balance of beauty and strength makes it a versatile favourite among designers and DIYers alike.

Why Choose Spencer RD0151?

Choose Anaglypta Spencer RD0151 when you want more than just wallpaper—you want heritage, resilience, and character in one product. With its elegant embossed pattern, customisable surface, and unbeatable durability, this Supaglypta design delivers impact that lasts.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 11cm
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.