Anaglypta Seymour – RD0655 Supaglypta

Classic Design with Lasting Impact

The Anaglypta Seymour RD0655 Supaglypta wallpaper adds sophistication and character to any space. Featuring a traditional damask-inspired pattern with intricate detailing, it instantly elevates your room. Whether you’re restoring a Victorian home or updating a feature wall, this wallpaper offers a bold, timeless solution.

Exceptional Strength with Supaglypta Construction

Built using two layers of reinforced paper, Seymour RD0655 doesn’t just look good—it’s built to last. The robust structure resists scuffs, bumps, and general wear, making it ideal for busy areas like hallways, staircases, and living rooms. Unlike many decorative wallpapers, this one stands up to daily life without losing its elegance.

Customise It with Paint

Supplied in white, Anaglypta Seymour RD0655 is designed to be painted. This allows you to fully tailor the finish to suit your space. Choose a deep tone for a dramatic look, or a softer colour to let the texture shine subtly. Regardless of your palette, the embossed pattern retains its crisp definition.

Easy to Apply and Maintain

Despite its heavyweight quality, installation is straightforward. It cuts cleanly, adheres well to most surfaces, and allows for a smooth application. After fitting, you can easily wipe it clean with a damp cloth—making it a practical choice for family homes or commercial interiors.

A Perfect Fit for Statement or Traditional Spaces

Thanks to its rich design and rugged construction, Seymour RD0655 works beautifully in both modern and classic settings. It suits period restorations, boutique hotel rooms, and stylish residential spaces alike. Wherever you use it, this wallpaper creates a sense of depth, texture, and elegance.

Why Choose Seymour RD0655?

If you want bold design and enduring quality in one product, Anaglypta Seymour RD0655 delivers. Its Supaglypta construction guarantees long-term performance, while its ornate pattern brings walls to life. Choose this wallpaper to enjoy timeless style without sacrificing durability.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 26.5cm
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.