Anaglypta Milford Plain – 44674 Luxury Textured Vinyl

Subtle Texture for Timeless Elegance

Anaglypta Milford Plain 44674 luxury textured vinyl wallpaper features a refined, understated texture that adds depth without overwhelming your walls. This simple yet elegant design complements a wide range of interior styles, from traditional to modern. It creates a calm and sophisticated backdrop that enhances your room’s overall aesthetic.

Durability and Easy Maintenance

This wallpaper uses high-quality vinyl, which provides excellent durability and resistance to wear. Moreover, its washable surface allows you to keep your walls clean with minimal effort. As a result, Milford Plain 44674 is perfect for busy homes or commercial spaces where maintaining fresh, pristine walls is important.

Smooth Application and Practical Benefits

The wallpaper’s flexible vinyl material allows for smooth and straightforward installation on most wall surfaces. Additionally, its texture helps to mask minor imperfections, reducing the need for extensive wall preparation. This practical advantage saves time and ensures your walls look flawless after application.

Versatile Design for Any Room

Whether you want to refresh a living room, bedroom, or office, Anaglypta Milford Plain 44674 adapts easily to your décor. It pairs well with various colours and furniture styles, giving you the freedom to personalise your space effortlessly. Furthermore, its luxury vinyl finish adds subtle depth and dimension to your walls.

Why Choose Anaglypta Milford Plain 44674 Anaglypta?

This wallpaper balances aesthetic appeal with practical features. It delivers a classic textured look while protecting your walls against daily wear. Ultimately, Milford Plain 44674 offers a cost-effective and stylish way to upgrade your interiors, combining beauty, strength, and easy maintenance. Transform your space with Milford Plain 44674 Anaglypta and enjoy durable, elegant walls that last.

Specification

Coverage	Roll Length	Roll Width
5.3m2	10m	0.53m

Match Type: Offset Match
Pattern Repeat: 32cm
Suitability: Walls & Ceilings

Recommended Paste

Easy Paste Ready Mixed
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted priot to 1960 may contain lead pigments, special precautions should be taken during preperation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughed gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• Use a good quality flake or ready mized adhesive suitable for heavy weight wallcoverings (mix if applicable) and apply to the manufacturers instructions.

Application Guidance (for walls)

1. Measure 50cm (20″) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumb line as a guid mark a vertical line from ceiling to floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.
2. Cut strips to length allowing extra for pattern match & trimmings. Apply adhesive ensuring the entire reverse is well covered.
3. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.
4. Position the paper on the wall following the guideline. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush; other implements such as rollers and spatulas may permanently flatten the surface.
5. Crease and mark with a pencil before trimming to size at the top and bottom, or other features such as door frames.
6. Remove excess adhesive from the surface immediately with a damp sponge.
7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square, it may be advantageous to consider hanging the strips across the shorter side for easier handling.
2. Draw a guide line 50cm (20′) from the edge of the ceiling.
3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.
4. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the oase does not dry out before application – apply extra paste if necessary.
5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brusing out towards the edgeds, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.
6. Crease and trim at edges.
7. Remove excess paste immediately with a damp sponge.
8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
9. This product can be painted once the adhesive is fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.