Anaglypta Hive – RD5671 Luxury Textured Vinyl

Modern Texture with a Geometric Edge

Inject bold character into your space with Anaglypta Hive RD5671 from the Luxury Textured Vinyl collection. Inspired by honeycomb geometry, this wallpaper features a striking hexagonal pattern that instantly adds dimension and style. It’s the perfect choice if you want your walls to make an impact without overwhelming the room.

A Durable Design for High-Traffic Spaces

Crafted from robust luxury vinyl, Hive RD5671 doesn’t just look great—it also performs. Its heavyweight construction offers impressive durability, making it ideal for hallways, living rooms, or commercial interiors. Unlike standard wallpaper, this textured finish resists knocks and scuffs with ease, so your walls maintain their bold look over time.

Paintable for Total Creative Freedom

One of Hive’s standout features is its fully paintable surface. Whether you choose crisp whites, dark contrasts, or vibrant colours, this wallpaper adapts to your style. It absorbs paint cleanly and evenly, allowing you to achieve a flawless, personalised finish. Better yet, you can repaint it whenever you want to refresh your interior—no stripping required.

Effortless Installation with Long-Term Results

Despite its luxurious feel, Hive is easy to hang with the right adhesive. The embossed vinyl lays flat and covers minor wall imperfections with ease. Once installed, it offers a clean, continuous finish that complements both minimal and maximalist schemes.

Why Choose Hive RD5671?

If you love bold, structured patterns and need durability to match, Anaglypta Hive RD5671 is a smart solution. Its geometric embossing adds texture and movement, while the vinyl surface guarantees long-lasting performance. With the flexibility to paint it any shade, this wallpaper helps you create a customised look that lasts. Whether used as a feature wall or full-room design, Hive delivers modern sophistication and practical resilience in equal measure.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.5m	0.52m

Match Type: Straight Match
Pattern Repeat: 16cm
Suitability: Walls & Ceilings

Recommended Paste

Easy Paste Ready Mixed
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted priot to 1960 may contain lead pigments, special precautions should be taken during preperation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughed gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• Use a good quality flake or ready mized adhesive suitable for heavy weight wallcoverings (mix if applicable) and apply to the manufacturers instructions.

Application Guidance (for walls)

1. Measure 50cm (20″) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumb line as a guid mark a vertical line from ceiling to floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.
2. Cut strips to length allowing extra for pattern match & trimmings. Apply adhesive ensuring the entire reverse is well covered.
3. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.
4. Position the paper on the wall following the guideline. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush; other implements such as rollers and spatulas may permanently flatten the surface.
5. Crease and mark with a pencil before trimming to size at the top and bottom, or other features such as door frames.
6. Remove excess adhesive from the surface immediately with a damp sponge.
7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square, it may be advantageous to consider hanging the strips across the shorter side for easier handling.
2. Draw a guide line 50cm (20′) from the edge of the ceiling.
3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.
4. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the oase does not dry out before application – apply extra paste if necessary.
5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brusing out towards the edgeds, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.
6. Crease and trim at edges.
7. Remove excess paste immediately with a damp sponge.
8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
9. This product can be painted once the adhesive is fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.