Anaglypta High Trad – RD80027 Luxury Textured Vinyl

Traditional Design with a Modern Edge

Step into classic elegance with Anaglypta High Trad RD80027. This textured vinyl wallpaper showcases a luxurious and intricate pattern inspired by timeless architectural design. Its deeply embossed surface brings depth and drama to any space, making it a perfect choice for those who want to add sophistication with lasting impact.

Built to Last – And Easy to Live With

Crafted from high-quality vinyl, this wallpaper isn’t just about style. It’s built to endure. The robust textured surface resists wear and tear, making it ideal for high-traffic areas such as hallways, lounges or dining rooms. Unlike traditional paper wallpapers, High Trad’s vinyl construction ensures easy maintenance and a longer lifespan.

Customisable with Colour

Thanks to its paintable surface, the Anaglypta High Trad RD80027 gives you creative freedom. Whether you prefer a bold, statement colour or something soft and muted, this wallpaper takes paint beautifully. Once painted, the embossed design really comes to life, casting subtle shadows and highlights that enhance the detail.

Perfect for Covering Imperfections

Beyond aesthetics, this design works hard behind the scenes too. The embossed texture effectively hides wall imperfections, reducing the need for extensive surface preparation. This makes it a practical solution for older homes or renovation projects.

Quick Specs

• Roll size: 53 cm x 10 m • Coverage: Approx. 5.3 m² • Material: Textured luxury vinyl • Finish: Paintable • Application: Paste-the-paper

Why Choose High Trad RD80027?

Because it combines the richness of traditional style with modern practicality. Its bold pattern, high durability, and flexible finish make it a smart choice for both decorators and homeowners. Whether you’re restoring period features or just adding texture to a plain room, Anaglypta High Trad RD80027 helps you achieve a high-end look with ease.

Specification

Coverage	Roll Length	Roll Width
5.3m2	10m	0.53m

Match Type: Offset Match
Pattern Repeat: 64cm
Suitability: Walls & Ceilings

Recommended Paste

Easy Paste Ready Mixed
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted priot to 1960 may contain lead pigments, special precautions should be taken during preperation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughed gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• Use a good quality flake or ready mized adhesive suitable for heavy weight wallcoverings (mix if applicable) and apply to the manufacturers instructions.

Application Guidance (for walls)

1. Measure 50cm (20″) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumb line as a guid mark a vertical line from ceiling to floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.
2. Cut strips to length allowing extra for pattern match & trimmings. Apply adhesive ensuring the entire reverse is well covered.
3. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.
4. Position the paper on the wall following the guideline. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush; other implements such as rollers and spatulas may permanently flatten the surface.
5. Crease and mark with a pencil before trimming to size at the top and bottom, or other features such as door frames.
6. Remove excess adhesive from the surface immediately with a damp sponge.
7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square, it may be advantageous to consider hanging the strips across the shorter side for easier handling.
2. Draw a guide line 50cm (20′) from the edge of the ceiling.
3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.
4. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the oase does not dry out before application – apply extra paste if necessary.
5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brusing out towards the edgeds, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.
6. Crease and trim at edges.
7. Remove excess paste immediately with a damp sponge.
8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
9. This product can be painted once the adhesive is fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.