Anaglypta Frazer – RD0107 Supaglypta

Timeless Texture with Built-In Strength

Elevate your interior with the bold and beautifully embossed Anaglypta Frazer RD0107 Supaglypta wallpaper. This classic pattern captures a refined, heritage feel while offering the rugged durability needed for modern homes. Whether you’re working on a restoration project or simply want to add rich texture, Frazer delivers charm and performance in equal measure.

Supaglypta Technology for Long-Lasting Style

Engineered using Anaglypta’s advanced Supaglypta technology, this wallpaper features a reinforced, dual-layer paper and textile base. That makes it stronger than standard wallcoverings and ideal for high-traffic areas like hallways, staircases, and living rooms. Even better, it effectively hides surface imperfections for a smooth, polished finish.

Paintable Surface for Endless Possibilities

Frazer RD0107 arrives ready to paint. Its crisp, embossed detail takes paint beautifully, allowing you to highlight the pattern or blend it seamlessly into your colour scheme. Choose soft neutrals for a subtle finish, or go bold with vibrant hues—either way, you stay in complete control of the final look.

Effortless to Hang, Impressive to See

Despite its robust build, Frazer wallpaper is surprisingly easy to apply. The thick material holds its shape well and helps ensure smooth alignment. As soon as it’s up, the room transforms—instantly gaining texture, elegance, and personality.

Versatile Styling for Any Space

While Anaglypta Frazer RD0107 fits perfectly into period interiors, it also adapts beautifully to transitional and contemporary settings. Use it on a feature wall for maximum impact, or apply it throughout for a fully immersive, tactile environment. The design’s balance of structure and flow suits both traditional and modern aesthetics.

Summary

Anaglypta Frazer RD0107 Anaglypta Supaglypta wallpaper brings together heritage-inspired design and cutting-edge performance. Its durable, paintable surface makes it ideal for busy households or bold interiors, while the timeless embossed pattern ensures a luxurious finish every time. With Frazer, you can create an interior that truly stands out—without sacrificing practicality.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 27cm
Suitability: Walls

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.