Anaglypta Edward – RD0602 Supaglypta

Bold, Traditional Texture That Elevates Your Walls

Anaglypta Edward RD0602 Supaglypta wallpaper delivers a striking embossed design that exudes classical elegance. Inspired by traditional interiors, this deeply textured pattern brings heritage appeal to living rooms, dining areas, hallways, or period properties. Whether you’re restoring a vintage home or creating a statement feature wall, Edward RD0602 makes an instant impact.

Premium Supaglypta Construction for Maximum Durability

Made using Supaglypta’s tough paper and vinyl blend, this wallpaper is designed to last. Its dual-layer construction makes it more durable than standard wallcoverings. Ideal for high-traffic areas, it resists knocks and scuffs, ensuring your space stays refined and fresh over time.

Paintable for Full Creative Freedom

One of the most appealing aspects of the Anaglypta Edward RD0602 is its paintable finish. Choose a bold colour for dramatic effect or opt for soft tones to complement period architecture. The intricate texture holds paint well and allows you to match your décor perfectly without losing any detail.

Practical Benefits with Timeless Style

Beyond beauty, this wallpaper provides practical solutions. Its deep embossing helps to conceal wall imperfections, saving you time on preparation. Additionally, it adheres easily to a range of surfaces and allows for clean, professional results, even for first-time decorators.

Why Choose Edward RD0602?

To sum up, Anaglypta Edward RD0602 Anaglypta Supaglypta offers a unique combination of classical design, strength, and flexibility. Its ornate pattern and heavyweight construction suit traditional spaces and busy homes alike. With paintability, durability, and character all in one, it’s the perfect choice for anyone who wants their walls to make a statement that lasts.

Specification

Coverage	Roll Length	Roll Width
5.3m2	10.05m	0.53m

Match Type: Straight Match
Pattern Repeat: 32cm
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.