Anaglypta Dryden – RD335 Original

Traditional Charm Meets Lasting Quality

The Anaglypta Dryden RD335 Original wallpaper brings timeless Victorian character into your home. With its beautifully detailed, embossed design, it effortlessly enhances both traditional and contemporary interiors. This classic pattern delivers rich texture and decorative interest to any room.

Durable and Designed to Be Painted

Crafted from thick, high-quality paper, Dryden RD335 is designed for durability. Unlike thin wallpapers, it stands up to daily wear and resists scuffing and minor damage. Even better, its paintable surface allows you to customise the finish to match your colour scheme. Whether you choose soft neutrals or bold shades, this wallpaper provides a versatile foundation.

Covers Imperfections with Ease

Thanks to its deeply embossed surface, Anaglypta Dryden RD335 effectively disguises hairline cracks, dents, and uneven walls. This makes it a smart choice for older homes or renovation projects where wall surfaces may not be perfect. As a result, you can achieve a professional finish without extensive prep work.

Effortless Elegance in Any Room

Install it in hallways, dining rooms, bedrooms, or even feature walls to introduce depth and dimension. Its elegant pattern creates visual interest while maintaining a subtle, sophisticated look. When paired with crisp paint and considered styling, Dryden becomes a standout element of your décor.

Why Choose Dryden RD335?

Choose Anaglypta Dryden RD335 if you’re looking for a wallpaper that offers classic styling, practical function, and customisable beauty. It’s part of the Anaglypta Original range, known for heritage-inspired design and durable quality. For a timeless look that won’t go out of style, Dryden RD335 is the perfect pick. Elevate your walls with this iconic wallpaper and enjoy the perfect balance of character and performance.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 17.6cm
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Please note this product is manufactured using traditional methods and materials and has a high paper content compared to Vinyl wallpapers and as such a long soaking time is required of 15 minutes so that full expansion takes place before attempting to hang the paper.
• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry. • Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive suitable for heavyweight wallcoverings and apply evenly. Typical consumption should be a minimum of 1 KG per roll but please follow the adhesive manufacturers guidance.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the fi rst strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to fl oor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

3. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

4. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.