Skip to main content

Cabin Wallpaper – Woods and Wicker Collection

£42.95 (Inc. VAT)

A4 samples are available to order.


Wallpaper Calculator
Wall width (m)
m
Wall height (m)
m
Roll width (m)
m
Roll length (m)
m

Cabin Wallpaper – Woods and Wicker Collection

Turn your space into a warm, inviting retreat with Cabin Wallpaper from our Woods and Wicker Collection. This design captures the charm of traditional woodland cabins, blending rustic textures and natural tones to create a grounded, comforting atmosphere. Subtle detailing adds depth and character, evoking the feeling of timber-lined interiors and forest escapes.

Perfect for living rooms, bedrooms, lodges, and cosy corners, Cabin Wallpaper pairs beautifully with natural wood, soft fabrics, and earthy colour palettes. Whether you’re designing a feature wall or transforming an entire room, it delivers a relaxed, homely feel that brings the calm of the outdoors right inside.

Width 53.0 cm ( 1 ft 8.87 in)
Length 10.05 m (10 yd 2 ft 9.7 in)
Area 5.3 sqm (6.4 sq yds)
Repeat 64.0 cm ( 25.2 in)
Match Offset
Surface Type Vinyl
Finish Flat
Washability Extra Washable: Stains and dirt can be removed with a light soap solution and a sponge.
Removability Dry Strippable: Wallpaper can be removed in one strip while the paper is dry. When the wallpaper is removed both the back and front layers will come off the wall.
Lightfastness Good: The wallpaper will tolerate sunlight and therefore is less likely to fade – important to look for when choosing wallpaper for long-term durability.
Application Paste-The-Wall
Fire Rating B-s1,d0

 

Hanging Instructions – Paste the Wall Wallpaper

  1. Prepare the Surface: Ensure walls are clean, dry, smooth, and free from dust, grease, and old adhesive. Remove loose paint, fill cracks, and sand if needed. Seal porous surfaces with a suitable primer.
  2. Check the Rolls: Before starting, check all rolls for batch numbers, colour consistency, and defects. Do not hang if any faults are found.
  3. Measure & Cut: Measure the wall height and cut lengths, allowing extra for trimming at the top and bottom. Match the pattern before cutting additional drops.
  4. Apply Adhesive: Apply a suitable paste-the-wall adhesive directly onto the wall using a roller or brush. Cover an area slightly wider than one drop.
  5. Hang the First Length: Use a plumb line or level to ensure the first drop is straight. Apply the dry wallpaper directly onto the pasted wall.
  6. Smooth the Paper: Smooth from the centre outwards using a wallpaper brush or smoother to remove air bubbles.
  7. Trim Excess: Trim the excess wallpaper at the top and bottom using a sharp blade and a straight edge.
  8. Join the Seams: Butt edges together carefully without overlapping. Ensure seams are neatly aligned and firmly pressed down.
  9. Clean the Surface: Wipe away any paste immediately with a clean, damp sponge. Avoid scrubbing.
  10. Allow to Dry: Let the wallpaper dry naturally. Keep the room ventilated and avoid extreme temperatures.

Delivery lead times are 2-3 working days for orders placed before 12pm. Orders placed after this will be processed the following working day.

Reviews

There are no reviews yet.

Be the first to review “Cabin Wallpaper – Woods and Wicker Collection”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping
0