Anaglypta Brooke – RD336 Original

Timeless Texture with Lasting Appeal

Anaglypta Brooke RD336 Original wallpaper brings the charm of a bygone era into your home. Featuring a finely embossed pattern, it adds rich texture and character to any space. Whether you’re renovating a period property or aiming to add vintage flair to a modern room, Brooke offers a beautiful and authentic finish.

Stylish and Practical Design

This wallpaper doesn’t just look good—it works hard too. The thick embossed surface helps to cover cracks, lumps, and minor wall imperfections, saving time on prep and smoothing. It’s ideal for creating feature walls, decorating entire rooms, or adding texture to ceilings. No matter where you use it, Brooke enhances your space with refined elegance.

Paintable for Endless Possibilities

Supplied in white, Brooke is fully paintable. You can leave it plain for a crisp look or customise it with any colour to suit your scheme. Whether you prefer soft, neutral tones or bold, dramatic shades, this wallpaper adapts to your style with ease. Better yet, it can be repainted in the future—perfect for evolving interiors.

Versatile Across All Settings

Thanks to its traditional design, Brooke suits a wide variety of rooms. It works beautifully in hallways, lounges, dining rooms, and bedrooms. It’s also popular for use below a dado rail or as a statement ceiling finish. Wherever you place it, the embossed texture brings depth and dimension.

Strong, Durable and Easy to Apply

Made from tough embossed paper,Anaglypta Brooke RD336 is built to last. Its structure adds strength without sacrificing flexibility, so hanging and trimming are straightforward. Once installed, the wallpaper provides long-lasting performance, even in busier areas of the home.

Classic Design with Modern Flexibility

Brooke blends traditional styling with the convenience of modern decorating. It offers a cost-effective way to add historic detail while giving you complete control over colour. You can enjoy the charm of heritage design without compromising on practicality.

Summary

Anaglypta Brooke RD336 Anaglypta Original wallpaper delivers timeless style, embossed texture, and paintable versatility. Ideal for period homes and character interiors, it offers a classic look with modern durability. Choose Brooke to elevate your space with heritage-inspired design and a finish that lasts.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10m	0.52m

Match Type: Free Match
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Please note this product is manufactured using traditional methods and materials and has a high paper content compared to Vinyl wallpapers and as such a long soaking time is required of 15 minutes so that full expansion takes place before attempting to hang the paper.
• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry. • Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive suitable for heavyweight wallcoverings and apply evenly. Typical consumption should be a minimum of 1 KG per roll but please follow the adhesive manufacturers guidance.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the fi rst strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to fl oor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

3. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for the pattern match and trimming. Apply the ready mixed adhesive evenly and ensure the entire revers is covered including the edges.

4. Fold pasted sides inwards and leave to soak for a minimum of 15 minutes. Before application check no areas of paste have dried out and apply a little additional paste if required.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface. NB; Small bubbles may appear randomly in the paper that reappear even after brushing. This indicates a little paper expansion has occurred after application and if not excessive this will disappear as the paper dries out.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.