Anaglypta Blarney Marble Stripe – RD80011

Elevate Your Walls with Timeless Stripes

The Anaglypta Blarney Marble Stripe RD80011 delivers elegance with a contemporary twist. Its vertical stripe design creates an effortlessly classic look that also enhances ceiling height and spatial flow. Subtle marble-style detailing within each stripe adds depth and texture without overwhelming the space. Whether you’re updating a period property or adding character to a new-build, this design works beautifully.

Luxury Vinyl for Strength and Style

This wallpaper doesn’t just look good—it performs exceptionally well. Made from durable textured vinyl, Anglypta Blarney Marble Stripe RD80011 withstands everyday wear, making it perfect for high-traffic areas like hallways, lounges and stairwells. Moreover, its sturdy material helps mask wall imperfections, saving time on surface prep while delivering a smooth finish.

Customise with Colour

One of the key advantages of RD80011 is its paintable surface. You can easily tailor the look to your home’s colour scheme. Whether you want a bold contrast or a soft, tonal palette, the embossed design catches the light beautifully once painted. This makes the texture stand out even more, bringing your walls to life.

Simple to Apply

The Anglypta Blarney Marble Stripe RD80011 uses a traditional paste-the-paper method, making it suitable for DIY decorators and professionals alike. Each roll covers approximately 5.3 square metres and features a straight match pattern for easy alignment.

Product Highlights:

• Roll size: 10m (length) x 0.53m (width) • Pattern match: Straight • Finish: Paintable, embossed luxury vinyl • Use: Suitable for all rooms, including high-traffic areas • Application: Paste the paper

Why Choose Blarney Marble Stripe RD80011?

Because it balances tradition with versatility. Its smart vertical lines, durable vinyl build, and customisable finish allow you to create a tailored, elegant look in any room. Whether you’re restoring charm or adding texture, this wallpaper adds refinement and depth that lasts.

Specification

Coverage	Roll Length	Roll Width
5.3m2	10m	0.53m

Match Type: Straight Match
Pattern Repeat: 32cm
Suitability: Walls

Recommended Paste

Easy Paste Ready Mixed
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted priot to 1960 may contain lead pigments, special precautions should be taken during preperation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughed gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• Use a good quality flake or ready mized adhesive suitable for heavy weight wallcoverings (mix if applicable) and apply to the manufacturers instructions.

Application Guidance (for walls)

1. Measure 50cm (20″) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumb line as a guid mark a vertical line from ceiling to floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.
2. Cut strips to length allowing extra for pattern match & trimmings. Apply adhesive ensuring the entire reverse is well covered.
3. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.
4. Position the paper on the wall following the guideline. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush; other implements such as rollers and spatulas may permanently flatten the surface.
5. Crease and mark with a pencil before trimming to size at the top and bottom, or other features such as door frames.
6. Remove excess adhesive from the surface immediately with a damp sponge.
7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square, it may be advantageous to consider hanging the strips across the shorter side for easier handling.
2. Draw a guide line 50cm (20′) from the edge of the ceiling.
3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.
4. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the oase does not dry out before application – apply extra paste if necessary.
5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brusing out towards the edgeds, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.
6. Crease and trim at edges.
7. Remove excess paste immediately with a damp sponge.
8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
9. This product can be painted once the adhesive is fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.