Skip to main content
Anaglypta Bark - RD44805 Luxury Textured Vinyl
Anaglypta Bark - RD44805 Luxury Textured Vinyl
Anaglypta Bark - RD44805 Luxury Textured Vinyl
Anaglypta Bark - RD44805 Luxury Textured Vinyl
Anaglypta Bark - RD44805 Luxury Textured Vinyl
  • Anaglypta Bark - RD44805 Luxury Textured Vinyl
  • Anaglypta Bark - RD44805 Luxury Textured Vinyl
  • Anaglypta Bark - RD44805 Luxury Textured Vinyl
  • Anaglypta Bark - RD44805 Luxury Textured Vinyl
  • Anaglypta Bark - RD44805 Luxury Textured Vinyl

Anaglypta Bark – RD44805 Luxury Textured Vinyl

RD44805

£10.40 (Inc. VAT)

The Anaglypta Bark RD44805 wallpaper delivers raw, natural texture with a bold bark-like pattern embossed in tough luxury vinyl. It’s ideal for feature walls or full-room designs in rustic, industrial, or modern spaces. Durable, washable, and easy to hang, this wallpaper offers standout style with practical benefits.

All samples are pre-cut to A5 size.


Arrives in 1–2 working days (same-day dispatch before 1pm)
See delivery tab for details
Wallpaper Calculator
Wall width (m)
m
Wall height (m)
m
Roll width (m)
m
Roll length (m)
m

Raw Texture Inspired by Nature

Bring the outdoors in with Anaglypta Bark RD44805 luxury textured vinyl wallpaper. Its design takes inspiration from natural tree bark, capturing organic grooves and irregular surface detail. This bold pattern brings depth and tactile interest to your walls, instantly elevating any interior.

Built for Strength and Style

While the texture feels raw and rugged, the vinyl finish offers reliable durability. Anaglypta Bark RD44805 stands up to daily wear and resists moisture and scuffs with ease. Whether you’re updating a hallway, bedroom, or open-plan living area, this wallpaper performs as beautifully as it looks.

Effortless Installation and Maintenance

You don’t need to be a professional to apply this wallpaper. Its high-quality construction makes it easy to position, align, and smooth onto walls. Once in place, it’s just as easy to care for—simply wipe it clean when needed. The durable vinyl surface stays fresh and flawless with minimal upkeep.

Versatile for a Range of Styles

The bark-inspired design adds texture and warmth to both rustic and contemporary interiors. Use it to create a striking feature wall or extend it across an entire space for a fully immersive look. Pair it with natural materials like wood, stone, or metal to bring out its earthy, grounded appeal.

Safe, Sustainable Choice

Bark RD44805 is manufactured to meet high environmental and safety standards. It’s a responsible option for eco-conscious homes that value both form and function.

Why Choose Bark RD44805?

This wallpaper offers more than surface beauty. It combines dramatic natural texture with modern durability, creating a versatile wall finish that holds up in real homes. With easy installation and effortless maintenance, Anaglypta Bark RD44805 brings timeless organic style with a modern edge.

Specification

Coverage Roll Length Roll Width
 5.2m2  10m  0.52m

Match Type: Straight Match
Pattern Repeat: 32cm
Suitability: Walls

Recommended Paste

Easy Paste Ready Mixed
Each roll will require approximately 1kg of adhesive paste

Preparation

  • Surfaces painted priot to 1960 may contain lead pigments, special precautions should be taken during preperation.
  • To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
  • Keep room warm and ventilated.
  • Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
  • Remove any existing loose wallcoverings or linings.
  • Surfaces must be clean, smooth and dry.
  • Cure areas affected by either damp or mould at the source.
  • Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
  • Roughed gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
  • Freshly painted surfaces should be left for at least 3 days prior to application.
  • Use a good quality flake or ready mized adhesive suitable for heavy weight wallcoverings (mix if applicable) and apply to the manufacturers instructions.

Application Guidance (for walls)

  1. Measure 50cm (20″) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumb line as a guid mark a vertical line from ceiling to floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.
  2. Cut strips to length allowing extra for pattern match & trimmings. Apply adhesive ensuring the entire reverse is well covered.
  3. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.
  4. Position the paper on the wall following the guideline. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush; other implements such as rollers and spatulas may permanently flatten the surface.
  5. Crease and mark with a pencil before trimming to size at the top and bottom, or other features such as door frames.
  6. Remove excess adhesive from the surface immediately with a damp sponge.
  7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
  8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

  1. If a ceiling is not square, it may be advantageous to consider hanging the strips across the shorter side for easier handling.
  2. Draw a guide line 50cm (20′) from the edge of the ceiling.
  3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.
  4. Fold pasted sides inwards and leave to soak for 5-7 minutes. If the soaking time is extended be careful to ensure the oase does not dry out before application – apply extra paste if necessary.
  5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brusing out towards the edgeds, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.
  6. Crease and trim at edges.
  7. Remove excess paste immediately with a damp sponge.
  8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.
  9. This product can be painted once the adhesive is fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.

Shopping cart0
There are no products in the cart!
Continue shopping
0