Anaglypta Argo – RD7100 Precision Vinyl

Architectural Precision with a Sleek Finish

Anaglypta Argo RD7100 Precision Vinyl Wallpaper offers a bold, modern statement for contemporary spaces. Its finely embossed geometric pattern delivers clean lines and symmetry, creating a subtle sense of structure and movement. Whether used as a feature wall or throughout a room, Argo adds clarity and purpose to your design scheme.

A Smart Choice for Modern Interiors

This wallpaper suits a range of minimalist, industrial, and Scandinavian-style interiors. The pattern feels architectural and grounded, yet it never overwhelms. Thanks to its smooth vinyl surface and refined detail, Argo works well in living rooms, hallways, offices, and even stylish bathrooms.

Paintable for Personalised Style

Although Anaglypta Argo RD7100 comes in a crisp white finish, it’s designed for customisation. The smooth vinyl takes paint beautifully, allowing you to create a look that perfectly fits your space. Use matte tones for a refined effect or add bold colour to turn up the impact.

Durable and Practical

Constructed from tough vinyl, this wallpaper offers more than just style. It stands up to daily wear and tear, making it ideal for busy homes or commercial settings. It also effectively hides small surface imperfections, thanks to its texture and weight.

Straightforward Application

Argo RD7100 is easy to hang and aligns cleanly. Its precision design ensures pattern continuity, while the high-quality material handles well during installation. You’ll get great results whether you’re a seasoned decorator or tackling your first DIY wallpaper project.

Versatile and Future-Proof

Because it’s paintable and neutral by design, Argo can evolve with your space. Redecorate with confidence as trends shift, knowing your walls can adapt with a simple colour change. It’s a long-term investment in flexible, future-ready style.

Summary

Anaglypta Argo RD7100 Anaglypta Precision Vinyl Wallpaper delivers crisp geometry, excellent durability, and customisable paintability. It’s perfect for clean, modern interiors that demand both form and function.

Specification

Coverage	Panel Length	Roll Width
7.3m2	7m	1.04m

Match Type: Straight Match
Pattern Repeat: 64cm
Suitability: Walls

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• Use a good quality ready mixed adhesive suitable for heavy weight wallcoverings and apply to the manufacturers instructions.

Hanging Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to fl oor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 10-12 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for Ceilings)

(Application is similar to wall application)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 10-12 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.