Anaglypta Alfred – RD0137 Supaglypta

Timeless Texture Meets Unrivalled Durability

The Anaglypta Alfred RD0137 Supaglypta wallpaper is a classic choice that delivers both style and substance. With its bold damask pattern and deep embossed texture, it instantly elevates any room. Yet, it’s more than just beautiful—it’s built to last. Designed with a reinforced paper and vinyl structure, Alfred is highly durable and perfect for high-traffic areas like hallways, staircases, and living spaces.

Heritage-Inspired for Modern Living

Anaglypta Alfred RD0137 draws from the grandeur of Victorian and Edwardian design. Its symmetrical flourishes and ornate styling evoke a sense of timeless elegance, making it ideal for period properties and modern homes alike. Whether you’re restoring a traditional interior or adding depth to a minimalist space, this wallpaper brings rich character with ease.

Paintable Finish for Custom Looks

One of Alfred’s standout features is its fully paintable surface. This allows you to create a bespoke finish tailored to your style. Paint it in soft neutrals for understated charm or go bold with rich tones for maximum impact. The raised pattern absorbs paint beautifully, adding visual depth and enhancing every detail of the damask design.

Covers Imperfections, Enhances Walls

Thanks to its heavyweight Supaglypta construction, Alfred excels at disguising wall flaws and uneven surfaces. It not only upgrades your décor but also offers a practical solution for ageing walls. Its thick layers make application straightforward while ensuring long-term resilience.

Versatile for Any Room

Use Anaglypta Alfred RD0137 as a statement feature wall or apply it throughout a space for a cohesive and dramatic look. It pairs beautifully with dado rails, picture mouldings, and classic furnishings. Yet, it also works just as well in eclectic or transitional interiors, adding texture without overwhelming the space.

Why Choose Alfred RD0137?

Choose Alfred if you want timeless design, customisable finishes, and trusted durability. As part of the Supaglypta collection, it brings you the best of Anaglypta tradition with enhanced performance. Bring your walls to life with heritage charm and confident texture—Alfred never goes out of style.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10.05m	0.52m

Match Type: Straight Match
Pattern Repeat: 53.4cm
Suitability: Walls & Ceilings

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

 

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.