Anaglypta Albert – RD0669 Supaglypta

Rich in Heritage, Built to Last

Anaglypta Albert RD0669 Supaglypta wallpaper delivers a bold decorative statement with a strong nod to vintage elegance. With its highly detailed, raised motif and classic design influence, this wallpaper adds immediate impact to any room. Whether you’re restoring a Victorian home or introducing traditional charm to a modern space, Albert RD0669 helps you achieve an authentic look that lasts.

Deeply Embossed and Paintable

Crafted using a dual-layer construction, this wallpaper offers a deeply textured surface that captures light and shadow beautifully. Better yet, the paintable finish allows you to tailor the look to suit your style—go bold with rich, dark tones or keep it soft and neutral for subtle sophistication. Either way, the design detail holds up beautifully under paint, retaining sharp definition even after multiple coats.

A Durable Choice for High-Traffic Areas

Thanks to its heavyweight Supaglypta construction, Anaglypta Albert RD0669 doesn’t just look great—it also performs exceptionally well. Use it in busy hallways, up staircases, or even on ceilings to hide minor cracks or blemishes. The tough, wipeable surface adds longevity, making it a smart choice for both practical and decorative needs.

Easy to Apply, Easy to Love

Hanging this wallpaper is simple. The thick backing helps prevent stretching or tearing, and it aligns cleanly for a professional finish. Whether you’re a seasoned decorator or a first-time DIYer, you’ll find the process smooth and manageable. Once it’s on the wall, you’ll appreciate the dramatic transformation it brings to your space.

Perfect for Traditional and Heritage Homes

Anaglypta Albert RD0669 feels right at home in period properties, but it also brings unique texture and charm to contemporary interiors. Use it as a feature wall in a modern room or as part of a full traditional restoration. Wherever you apply it, the result is always stunning.

In Summary

The Albert RD0669 Anaglypta Supaglypta wallpaper blends historical design with modern-day resilience. Its embossed, paintable surface offers both beauty and practicality, making it an inspired choice for any stylish interior.

Specification

Coverage	Roll Length	Roll Width
5.2m2	10m	0.52m

Match Type: Straight Match
Pattern Repeat: 53.4cm
Suitability: Walls

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

• Surfaces painted prior to 1960 may contain lead pigments, special precautions should be taken during preparation.
• To minimise the hazard in event of fire, do not hang wallcoverings over polystyrene veneers.
• Keep room warm and well ventilated.
• Turn electricity off at the main fuse box when working around switches, sockets, light fittings etc.
• Remove any existing loose wallcoverings or linings.
• Surfaces must be clean, smooth and dry.
• Cure areas affected by either damp or mould at the source.
• Pre-treat new plaster or other absorbent surfaces with a fungicidally protected adhesive or ‘size’.
• Roughen gloss painted surfaces with glass paper. Lining paper is recommended for uneven or contrasting surfaces.
• Freshly painted surfaces should be left for at least 3 days prior to application.
• We recommend a good quality ready mixed adhesive for application of this heavy, high quality product. Please note that some flake adhesives have a high pH, and can in extreme circumstances lead to separation of the layers in this product.

Application Guidance (for walls)

1. Measure 50cm (20”) out from a corner. Avoid an area with windows or other details for the first strip if possible. Using a plumbline as a guide mark a vertical line from ceiling to the floor. N.B; Always ensure the width of the roll will be wide enough to fill the gap between the line and the corner, especially important in older properties where corners may not be perpendicular.

2. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

3. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

4. Position the paper on the wall following the guide line. Brush down the paper starting at the center, brushing out towards the edges. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently fl atten the surface.

5. Crease and mark with a pencil before trimming to size at top and bottom or other features such as door frames.

6. Remove excess adhesive from the surface immediately with a damp sponge.

7. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

8. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Application Guidance (for ceilings)

1. If a ceiling is not square it may be advantageous to consider hanging the strips across the shorter side for easier handling.

2. Draw a guide line 50cm (20″) from the edge of the ceiling.

3. Cut strips to length allowing extra for pattern match & trimming. Apply adhesive ensuring the entire reverse is well covered.

4. Fold pasted sides inwards and leave to soak for 15 minutes. If the soaking time is extended be careful to ensure the paste does not dry out before application – apply extra paste if necessary.

5. Position the paper on the ceiling following the guideline. Brush the paper onto the ceiling starting at the centre and brushing out towards the edges, expelling all air bubbles. N.B Take care to only apply very light pressure when smoothing out the paper. Use a good quality brush, other implements such as rollers and spatulas may permanently flatten the surface.

6. Crease and trim at edges.

7. Remove excess paste immediately with a damp sponge.

8. Ensure subsequent lengths are applied in the correct direction use butt joints matching patterns as necessary. Ensure all lengths are firmly adhered.

9. This product can be painted once the adhesive has fully dried out, normally after 24-48 hours.

Delivery

Orders placed before 1:00pm will be dispatched the same day and are scheduled for delivery on the next working day.

Orders placed after 1:00pm will be dispatched on the next working day.

We typically send orders via Parcelforce. Once your order has been handed over to the courier, delivery times are dependent on their service. Delays are uncommon, but may occasionally occur.