Anaglypta Oriental – RD06700 Dado Panel

Elevate Your Interiors with Ornamental Texture

The Anaglypta Oriental RD06700 Dado Panel blends vintage style with practical design. Its richly embossed pattern brings classical depth and structure to any space. Whether you’re restoring a Victorian home or updating a modern room, this panel instantly adds visual interest.

Ideal for Lower Walls and Feature Spaces

Designed specifically as a dado panel, Anaglypta Oriental RD06700 adds definition to lower wall areas. It works perfectly beneath a dado rail or along hallways and staircases. Additionally, it can be used to break up larger walls, delivering both style and symmetry.

Customisable with Paint

This panel offers flexibility through its paintable surface. You can easily match it to your room’s palette or create contrast with bold colour choices. The raised detailing responds beautifully to paint, highlighting the ornate pattern and giving it a premium finish.

Strong, Reliable and Built to Last

Although it looks delicate, this panel is made to be durable. Its heavyweight paper construction resists minor knocks and covers uneven surfaces well. Installation is straightforward too — it adheres smoothly and provides a seamless result when properly aligned.

A Timeless Addition to Any Room

The Oriental RD06700 panel suits both period and contemporary interiors. Its design adds a sense of history and craftsmanship, yet it also feels at home in creative, eclectic spaces. Use it in lounges, dining rooms, entryways or even bathrooms to elevate your décor.

Summary

Anaglypta Oriental RD06700 Anaglypta Dado Panel offers classic beauty and functional design in one. Its ornate pattern, paintable surface and sturdy build make it an ideal choice for enhancing lower walls. With timeless charm and modern versatility, it’s a smart way to add character to your home.

Specification

Coverage	Panel Length	Roll Width
7.3m2	7m	1.04m

Match Type: Straight Match
Pattern Repeat: 64cm
Suitability: Walls

Recommended Paste

Ready Mixed Adhesive
Each roll will require approximately 1kg of adhesive paste

Preparation

Cure areas of damp and/or mould at source. Make sure your wall surfaces are clean, smooth, dry and free from any loose material. Absorbent (new) surfaces should be sized. Roughen up gloss painted surfaces with glass paper. Freshly painted surfaces should be left for at least 3 days before papering over. Always cross line your walls before hanging your decorative paper. Use a good quality adhesive, we recommend ready mixed adhesive for this textile reinforced product.

Hanging Guidance (not on stairs)

Please note if your project includes stairs, you should read the supplementary instructions for stairs before beginning.

1. If dado rails are not installed strike a straight line horizontally across the wall at the desired dado height

2. Cut the desired number of panels. (NB 1 full panel is 64cm in width)

3. Paste the wall or paste the paper. Use a good quality adhesive suitable for heavy wallcoverings. We recommend ready-mixed adhesives, especially when pasting the wall.

4. Position the paper, aligning the top of the design with the horizontal line or under the dado rail. It is important to ensure the paper is hung the correct way up as the bottom part of the panel is purposefully designed to be trimmed.

5. Brush the paper down and out from the centre to the edges expelling any paper bubbles and ensuring maximum contact with the wall.

6. Once the paper is in position trim off the excess at the skirting board.

7. Remove any excess paste with a damp sponge immediately.

Hanging Guidance (Stairs Only)

When intending to hang panels on stairs we recommend you start the whole project (including lower hall) at point ‘PLUMB A’ or ‘PLUMB B’ as shown on the product label. NB: This will minimise any detrimental visual impact in applications where the length of the staircase is not an exact multiple of the panel width. For illustrative purposes these instructions show ‘PLUMB A’ as the start point.

1. Few walls are truly square or perfectly vertical, so it is therefore important to avoid the pattern running out. Mark a vertical line (A) using a plumb line at the top of the stairs as shown. If no rail is installed mark a further vertical line (B) at the bottom of the stairs and mark another line between A and B as a trimming guide. (see product label for diagram)
2. A standard panel is 64cm in width and made up of 2 sub panels. On stairs half panels should be used, cut at 32cm widths as in figure 2. (see product label for diagram)
3. Start at the top ‘A’ and hang the first 32cm half panel vertically. SKIRTING B Trim the bottom of the panel carefully at the skirting and use the offcut to fill in at the top of the panel. NB: By starting the whole project at ‘A’ you will ensure the last ½ panel used on the stairs can be correctly trimmed at the bottom of the stairs. (see product label for diagram)

Product Label

Anaglypta Dado Panel Product Label