Skip to main content

Pay in installments with Klarna

Orderline: Retford 01777 712661
Open: Mon-Fri 9am-5pm

10% OFF NLXL, Ibride and more*with code GIVEME10

*NLXL, Ibride, Graypants, Mind The Gap, Leff, Carmine Lake, Lyon Beton and Humble.

Easter Bank Holiday

Orders may resume but will be dispatched from Tuesday 2nd April due to the Easter break.

Prepare Your Walls

These lining papers are designed to protect and prepare older plaster in good condition for your paint or wallpaper. They are all professional grade, along with some specialist products for heat insulation, warmer walls, damp proofing walls and more...

http://schema.org/InStock
Brand: Red Label
Product Code: Supercover 2500 Single Length
Availability: In Stock

Price: £5.00
Ex VAT: £4.17

Available Options

* Roll Size:

Overview

Protects and prepares older and/or damaged plaster for paint or wallpaper.
The thickest available traditional lining paper offering even better performance than 1700 or 2000 grade on damaged plaster.

Features

  • Thickest lining paper available
  • Smooths out walls priot to painting or hanging with decorative wallpaper
  • Excellent base surface
  • Allows walls to breathe
  • Easy to use
  • Contains no PVC or Fibreglass
  • Uses paper from well managed sources

Specification

Coverage Roll Length Roll Width
5.3m2 10m 0.53m
5.3m2 20m 0.53m



Match Type: Free Match
Suitability: Walls & Ceilings

Recommended Paste

Good Quality Ready Mixed Adhesive

Specifications
Dimensions 53cm x 10m
Coverage 5.3m2
Match Type  
Material  
Additional Information
Suitability Walls & Ceilings
Recommended Paste Good quality ready mixed adhesive

Hanging Instructions

1. Ensure that base surfaces are clean, dry, firm and free from any loose or flaking material.
2. Apply the adhesive generously to the wall using a roller. As a guide we recommend 1.25Kg of paste per roll, more if the base surface is uneven or textured, where it is especially important to apply a thick bed of adhesive. Cover an area sufficient to apply one length of Heatsaver Wall Underliner at a time ensuring the pasted area exceeds the width of the Heatsaver. Use a brush or spatula to apply adhesive to areas the roller cannot reach.
3. Apply Heatsaver directly from the roll onto the wet adhesive. Smooth out any bubbles with a roller or similar. Leave a small amount of surplus material for trimming where necessary.
4. Cut off any excess material at the ceiling, floors and corners using a trimming knife in combination with a forming board. On external corners the exposed edge of the material can be filled and sanded with flexible filler to give a neat finish.
5. Allow 48 hours for drying, longer if conditions are especially humid or cold. We also recommend that all wallcoverings are allowed to dry naturally and therefore recommend that heating is turned off whilst the wallcovering adhesive dries out, unless ambient temperatures are likely to drop below 10°C/50°F.
6. Any small gaps at seams and corners can be filled with flexible filler prior to applying a suitable Lining Paper.
7. We recommend that the Heatsaver is lined before painting or covered with a decorative wallpaper.

Adhesive
We recommend Wallrock Thermal Liner Adhesive for application of Red Label Heatsaver or other solvent free adhesives suitable for hanging polystyrene veneers. However, we cannot accept responsibility for adhesion problems when an adhesive other than Wallrock Thermal Liner Adhesive has been used.
When overhanging, we strongly recommend the use of a ready mixed adhesive suitable for heavy weight wallcoverings, applied to the manufacturers instructions. We recommend our Wallrock Power Adhesive.
Important
Inspect rolls carefully before application. We cannot accept claims for consequential loss in respect of defects apparent prior to application. Every effort is made to ensure all rolls reach you in perfect condition, but faults can occur from time to time. Please retain all labels until the project is complete and you are satisfied with the results - we will require them in the unlikely event you encounter a problem. We recommend that after hanging no more than 2 lengths, the result is inspected before continuing.
Important Safety Information
Surfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing these surfaces.
This product is suitable as a localised ‘problem solver’ for cold external walls and is not recommended for use in fire escape routes inside your home unless the surface is further treated with a fire retardant covering.
This product should not be used for projects such as new builds and extensions where building regulations are applicable.

There are no reviews for this product.
Write a review
Verification code *
Facebook comment