Skip to main content

Pay in installments with Klarna

Orderline: Retford 01777 712661
Open: Mon-Fri 9am-5pm

10% OFF NLXL, Ibride and more*with code GIVEME10

*NLXL, Ibride, Graypants, Mind The Gap, Leff, Carmine Lake, Lyon Beton and Humble.

Easter Bank Holiday

Orders may resume but will be dispatched from Tuesday 2nd April due to the Easter break.

Prepare Your Walls

These lining papers are designed to protect and prepare older plaster in good condition for your paint or wallpaper. They are all professional grade, along with some specialist products for heat insulation, warmer walls, damp proofing walls and more...

http://schema.org/InStock

Heatsaver is an economical, 2mm thick polystyrene liner containing fire retardants that provides basic insulation as well as combating condensation and mould growth. To create a more durable and smoother surface we recommend the product is overlined; Wallrock is particularly tough and strong.

Brand: Red Label
Product Code: Red Label Heat Saver
Availability: In Stock

Price: £4.50
Ex VAT: £3.75

Overview

Heatsaver is an economical, 2mm thick polystyrene liner containing fire retardants that provides basic insulation as well as combating condensation and mould growth. To create a more durable and smoother surface we recommend the product is overlined; Wallrock is particularly tough and strong.

Features

  • For quick and easy heatsaving on inside walls.
  • Resists damp and mould formation on problem walls.
  • CFC free.
  • Use a good quality ready mixed adhesive suitable for polystyrene wallcoverings such as our Wallrock Thermal Liner Adhesive, or other good quality ready mixed adhesive suitable for polystyrene veneers.
  • Can be overhung with a decorative wallpaper.
  • Suitable for painting once a lining paper has been applied. We recommend covering with lining paper before painting for a smoother tougher surface.
  • Combats the build up of condensation.
  • Fire Rating: E

Specification

Coverage Roll Length Roll Width
 5.0m2  10m  0.5m

Match Type: Free Match
Suitability: Walls & Ceilings

Recommended Paste

Good Quality Ready Mixed Adhesive Suitable For Polystyrene Veneer

Specifications
Dimensions 50cm x 10m
Coverage 5.0m2
Match Type Free Match
Material Reinforced paper liner with 2mm thick polystyrene veneer
Additional Information
Suitability Walls & Ceilings
Recommended Paste Good quality ready mixed adhesive suitable for polystyrene veneer

Hanging Instructions

1. Ensure that base surfaces are clean, dry, firm and free from any loose or flaking material.
2. Apply the adhesive generously to the wall using a roller. As a guide we recommend 1.25Kg of paste per roll, more if the base surface is uneven or textured, where it is especially important to apply a thick bed of adhesive. Cover an area sufficient to apply one length of Heatsaver Wall Underliner at a time ensuring the pasted area exceeds the width of the Heatsaver. Use a brush or spatula to apply adhesive to areas the roller cannot reach.
3. Apply Heatsaver directly from the roll onto the wet adhesive. Smooth out any bubbles with a roller or similar. Leave a small amount of surplus material for trimming where necessary.
4. Cut off any excess material at the ceiling, floors and corners using a trimming knife in combination with a forming board. On external corners the exposed edge of the material can be filled and sanded with flexible filler to give a neat finish.
5. Allow 48 hours for drying, longer if conditions are especially humid or cold. We also recommend that all wallcoverings are allowed to dry naturally and therefore recommend that heating is turned off whilst the wallcovering adhesive dries out, unless ambient temperatures are likely to drop below 10°C/50°F.
6. Any small gaps at seams and corners can be filled with flexible filler prior to applying a suitable Lining Paper.
7. We recommend that the Heatsaver is lined before painting or covered with a decorative wallpaper.

Adhesive
We recommend Wallrock Thermal Liner Adhesive for application of Red Label Heatsaver or other solvent free adhesives suitable for hanging polystyrene veneers. However, we cannot accept responsibility for adhesion problems when an adhesive other than Wallrock Thermal Liner Adhesive has been used.
When overhanging, we strongly recommend the use of a ready mixed adhesive suitable for heavy weight wallcoverings, applied to the manufacturers instructions. We recommend our Wallrock Power Adhesive.
Important
Inspect rolls carefully before application. We cannot accept claims for consequential loss in respect of defects apparent prior to application. Every effort is made to ensure all rolls reach you in perfect condition, but faults can occur from time to time. Please retain all labels until the project is complete and you are satisfied with the results - we will require them in the unlikely event you encounter a problem. We recommend that after hanging no more than 2 lengths, the result is inspected before continuing.
Important Safety Information
Surfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing these surfaces.
This product is suitable as a localised ‘problem solver’ for cold external walls and is not recommended for use in fire escape routes inside your home unless the surface is further treated with a fire retardant covering.
This product should not be used for projects such as new builds and extensions where building regulations are applicable.

Heat Saver Brochure 

Download

There are no reviews for this product.
Write a review
Verification code *
Facebook comment