Red Label Insulating Lining Paper
Insulating paper is 4mm thick providing effective internal wall insulation as well as combating condensation and mould growth. As with ‘Heatsaver’ this product is treated with fire retardant. The product is supplied ready laminated to a reinforced liner for easier handling and to provide a basic surface that it is possible to paint directly although over lining is recommended to achieve a good finish and improve durability of the surface.
Price:
£9.00
Ex VAT:
£7.50
Overview
Insulating paper is 4mm thick providing effective internal wall insulation as well as combating condensation and mould growth. As with ‘Heatsaver’ this product is treated with fire retardant. The product is supplied ready laminated to a reinforced liner for easier handling and to provide a basic surface that it is possible to paint directly although over lining is recommended to achieve a good finish and improve durability of the surface.
Features
- 4mm Polystyrene insulation with bonded reinforcement
- For quick and effective insulation of inside walls
- Resists damp and mould formation on problem walls
- Twice as thick as regular polystyrene wall veneers
- CFC free
- Use a good quality ready mixed adhesive suitable for application of polystyrene wallcoverings such as our Wallrock Thermal Liner Adhesive
- Covers damaged walls and surfaces
- e Rating: E
Specification
Coverage | Roll Length | Roll Width |
5.0m2 | 10m | 0.5m |
Match Type: Free Match
Suitability: Walls & Ceilings
Recommended Paste
Specifications | |
---|---|
Dimensions | 50cm x 10m |
Coverage | 5.0m2 |
Match Type | Free Match |
Material | 4mm thick reinforced paper liner |
Additional Information | |
Suitability | Walls & Ceilings |
Recommended Paste |
Application Instructions
1. Ensure that base surfaces are clean, dry, firm and free from any loose or flaking material.
2. Apply the adhesive generously to the wall using a roller. As a guide we recommend 2.5Kg of paste per roll, more if the base surface is uneven or textured, where it is especially important to apply a thick bed of adhesive. Cover an area sufficient to apply one length of Insulating Lining Paper at a time ensuring the pasted area exceeds the width of the Insulating Lining Paper. Use a brush or spatula to apply adhesive to areas the roller cannot reach.
3. The expanded polystyrene side of the product should be applied to the adhesive/wall. Apply Insulating Lining Paper directly from the roll onto the wet adhesive and slide into place. Smooth out any bubbles with a roller or similar. Leave a small amount of surplus material for trimming where necessary.
4. Cut off any excess material at the ceiling, floors and corners using a trimming knife in combination with a forming board. On external corners the exposed edge of the material can be filled and sanded with flexible filler to give a neat finish - especially useful if you do not intend to overhang with Wallrock Fibreliner.
5. Allow 48 hours for drying, longer if conditions are especially humid or cold. We also recommend that all wallcoverings are allowed to dry naturally and therefore recommend that heating is turned off whilst the wallcovering adhesive dries out, unless ambient temperatures are likely to drop below 10°C/50°F.
6. Any small gaps at seams and corners can be filled with flexible filler prior to painting directly with standard emulsion paint or overhanging with decorative wallpaper.
OR....
7. After filling any small gaps at seams you may wish to improve and strengthen the surface further by cross lining. For this we recommend Wallrock Fibreliner which has exceptional strength and is very easy to apply. Complete the project by painting or overhanging with decorative wallpaper. NB: For consistent results we recommend using Paste The Wall products over Insulating Lining Paper.
Adhesive
We recommend our Red Label Adhesive or Wallrock Thermal Liner Adhesive for application of Red Label Insulating Lining Paper or other solvent free adhesives suitable for hanging polystyrene wallcoverings. However, we cannot unfortunately accept responsibility for adhesion problems when an adhesive other than Wallrock Thermal Liner Adhesive has been used.
Important
Inspect rolls carefully before beginning as we cannot accept claims for consequential loss in respect of any defects apparent prior to hanging. Every effort is made to ensure all rolls reach you in perfect condition, but faults can occur from time to time. Please retain all labels until the project is complete and you are satisfied with the results - we will require them in the unlikely event you encounter a problem we recommend that after hanging no more than 2 lengths, the result is inspected before continuing.
Warning
Surfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing these surfaces. This product is suitable as a localised ‘problem solver’ for cold external walls and is not recommended for use in fire escape routes inside your home unless the surface is further treated with a fire retardant covering. This product should not be used for projects such as new builds and extensions where building regulations are applicable.