Wallrock - Power Adhesive
Wallrock Power adhesive is a technically advanced, high performance ready mixed adhesive that offers excellent bond quality and ease of use, ideal for use with Wallrock liners and most other wallcoverings.
Price:
£13.00
Ex VAT:
£10.83
Overview
Wallrock Power adhesive is a technically advanced, high performance ready mixed adhesive that offers excellent bond quality and ease of use, ideal for use with Wallrock liners and most other wallcoverings.
Typical Coverage
Typical Coverage | Tub Size |
25m2 | 5kg |
50m2 | 10kg |
Products Suitable for Hanging
- Lining Paper
- Wallrock Trend and Wallrock Texture
- Wallrock Fibreliner
- Wallrock Fibreliner Plus
- Wallrock Premium
- Eco Wallpaper
- Expanded Blown Vinyl
Features
- Suitable for most types of wallpaper
- High performance aqueous paste based on a blend of natural starches
- Thick, smooth, easy to use formula - roll or brush straight from tub
- Low splatter, high wet tack, easy to slide and position
- Added PVA for increased strength, resistance to moisture and humidity
- Contains an inhibitor to prevent mould, yeast and fungal growth
Suitable for
- Wallrock products*
- Anaglypta products*
- Standard wallpapers
- Embossed wallpapers
- Paste-The-Wall wallpapers
- Expanded
- Heavy-weight & Luxury Vinyls
- Fabric & Glassfibre wallcoverings
*not recommended for Wallrock Thermal Liners, Insulators Range, Cosy Liner KV300 or Sound Insulation where Wallrock Thermal Liner Adhesive should be used.
Surface Preparation
- Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.
- Drywall and other absorbent surfaces must be sized and completely left to dry.
- Sizing should be completed at least 4 hours before. Pasting And Hanging - Paste-The-Wall
- Refer to wallpaper manufacturers label for specific instructions. Ensure wallpaper is suitable for Paste-The-Wall application.
- For best result use a roller to apply Wallrock Power Adhesive generously and evenly to the wall. Ensure coverage of the wall from floor to ceiling is complete.
- A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
- Paste up to two widths of wallpaper at once to reduce decoration time.
- Apply paper to pasted wall.
- Simply position wallpaper sheet by sliding and smooth into final place under pressure using a squeegee, wallpaper brush or damp sponge.
- Complete hanging and trimming as normal.
Pasting And Hanging - Paste-The-Paper
- Refer to wallpaper manufacturers label for specific instructions - eg. soak time etc.
- Protect surrounding areas (floor coverings and furniture etc) from splashes and drips.
- Paste wallpaper generously, ensuring that edges are fully covered with the paste, allow heavyweight papers to soak until supple, (unless Paste-The-Wall products ie. Wallrock).
- A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
- Ensure edges are stuck to the wall.
- Remove any paste from the face of the wallpaper and surrounding area immediately with a damp cloth or sponge.
- Clean tools and equipment in warm soapy water.
Important
- Do not thin or add water to the adhesive.
- Not suitable for hanging borders or overlapping seams on vinyl wallpapers.
- For best results use vinyl to vinyl adhesive for hanging borders, overlapping seams, and for repairs.
- Contains fungicide and biocide to inhibit mould, yeast and bacteria. Keep away from children and animals. Wash hands thoroughly after use.
- Do not empty into drains or watercourses. Waste should be disposed of using authorised disposal routes and sites.
This product is currently going through a packaging change therefor you may recieve a visually different looking product however the contents are exactly the same.