Orderline: 01777 712661
Open: Mon-Fri 9am-5pm

Demo
Your shopping cart is empty!
Wallrock Wallrock Power Adhesive Wallrock Power adhesive is a technically advanced, high performance ready mixed adhesive that offers.. Product #: Wallrock Power Adhesive based on 0 reviews Regular price: $8.29 $8.29 In Stock
Brand: Wallrock
Product Code: Wallrock Power Adhesive
Availability: In Stock

£9.95
Ex VAT: £8.29

Available Options

* Tub Size:

Overview

Wallrock Power adhesive is a technically advanced, high performance ready mixed adhesive that offers excellent bond quality and ease of use, ideal for use with Wallrock liners and most other wallcoverings.

Typical Coverage

Typical Coverage Tub Size
25m2 5kg
50m2  10kg

Products Suitable for Hanging

Features

  • Suitable for most types of wallpaper
  • High performance aqueous paste based on a blend of natural starches
  • Thick, smooth, easy to use formula - roll or brush straight from tub
  • Low splatter, high wet tack, easy to slide and position
  • Added PVA for increased strength, resistance to moisture and humidity
  • Contains an inhibitor to prevent mould, yeast and fungal growth

Suitable for

  • Wallrock products*
  • Anaglypta products*
  • Standard wallpapers
  • Embossed wallpapers
  • Paste-The-Wall wallpapers
  • Expanded
  • Heavy-weight & Luxury Vinyls
  • Fabric & Glassfibre wallcoverings

*not recommended for Wallrock Thermal Liners, Insulators Range, Cosy Liner KV300 or Sound Insulation where Wallrock Thermal Liner Adhesive should be used.

Surface Preparation

  • Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.
  • Drywall and other absorbent surfaces must be sized and completely left to dry.
  • Sizing should be completed at least 4 hours before. Pasting And Hanging - Paste-The-Wall
  • Refer to wallpaper manufacturers label for specific instructions. Ensure wallpaper is suitable for Paste-The-Wall application.
  • For best result use a roller to apply Wallrock Power Adhesive generously and evenly to the wall. Ensure coverage of the wall from floor to ceiling is complete.
  • A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
  • Paste up to two widths of wallpaper at once to reduce decoration time.
  • Apply paper to pasted wall.
  • Simply position wallpaper sheet by sliding and smooth into final place under pressure using a squeegee, wallpaper brush or damp sponge.
  • Complete hanging and trimming as normal.

Pasting And Hanging - Paste-The-Paper

  • Refer to wallpaper manufacturers label for specific instructions - eg. soak time etc.
  • Protect surrounding areas (floor coverings and furniture etc) from splashes and drips.
  • Paste wallpaper generously, ensuring that edges are fully covered with the paste, allow heavyweight papers to soak until supple, (unless Paste-The-Wall products ie. Wallrock).
  • A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
  • Ensure edges are stuck to the wall.
  • Remove any paste from the face of the wallpaper and surrounding area immediately with a damp cloth or sponge.
  • Clean tools and equipment in warm soapy water.

Important

  • Do not thin or add water to the adhesive.
  • Not suitable for hanging borders or overlapping seams on vinyl wallpapers.
  • For best results use vinyl to vinyl adhesive for hanging borders, overlapping seams, and for repairs.
  • Contains fungicide and biocide to inhibit mould, yeast and bacteria. Keep away from children and animals. Wash hands thoroughly after use.
  • Do not empty into drains or watercourses. Waste should be disposed of using authorised disposal routes and sites.
There are no reviews for this product.
Write a review
BadExcellent
Facebook comment