Orderline: 01777 712661
Open: Mon-Fri 9am-5pm
Wallrock® Caulk King Premium Filler & Sealant is an easily applied, high quality solvent free filler and sealant that ensures it is suitable for many outdoor applications as well as indoor use.
Typical applications include; sealing around window frames, architraves, cornices, PVC profile trim, PVC cladding, cracks and gaps in brickwork, stone, concrete and between skirting boards and walls. Wallrock® Caulk King Premium Filler & Sealant can be used as an adhesive for bonding polystyrene.
It is NOT suitable for use on PE, PP, Teflon, bituminous surfaces or below ground level.
Premium Filler Sealant is an easily applied high quality solvent free caulk and sealant that ensures it is suitable for many outdoor applications as well as use indoors. Typical applications are, sealing around window frames, architraves, cornices, PVC profile trim, PVC cladding, cracks and gaps in brickwork, stone, concrete and between skirting board and walls. CAULK KING can be used as an adhesive for bonding polystyrene. It is NOT suitable for use on PE, PP, Teflon and bituminous surfaces or use below ground level.
Directions for use
Surfaces must be clean and free from loose material, standing water or contaminants which may impair the bond. Non-porous surfaces such as aluminium should be cleaned with a suitable product. For application where some movement will be exhibited i.e. construction joints, the minimum open joint dimensions should be 6mm x 6mm with the maximum dimensions being 25mm wide by 12mm deep. Where larger open joints are found, depth can be reduced using backing strips or rods. NB; For areas of perimeter pointing where a fillet is to be applied, the minimum measurement across must be 10mm with a minimum depth of 6mm. Ensure joints are properly prepared and apply sealant firmly into the joint using an application gun. Always ensure a deep fill for best results. Once applied, sealant can be tooled and formed to the required shape and finish. NB; A degree of natural shrinkage will occur as a result of drying so it is advisable to apply the sealant slightly proud of the required level to allow for this.
Cleaning and Storage
Surrounding surface and tools can be cleaned with water. Store in dry conditions between 5°C and 25°C. PROTECT FROM FROST when stored.
Each cartridge contains sufficient material to fill an open joint 6mm deep x 6mm wide and approximately 11 metres in length, excluding wastage.
Health and safety
Acrylic Sealant presents no known health hazards when used as recommended. Consult Health and Safety data sheet for further information available on the Erfurt Mav website at www.erfurtmav.com or tel +44 (0)1472 616597. As with all similar products, care should be taken during use and storage to avoid contact with foodstuffs, skin, eyes and mouth. If accidentally ingested, seek medical attention do not induce vomiting and give copious amounts of water to drink. Keep away from children and animals.
This product is classed as a ‘construction sealant’ in accordance with ISO11600. All information is offered in good faith as typical values and not as a product specification. No warranty, either expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate.
Retford Enterprise Centre
Retford, DN22 7GR
+44 (0)1777 712661
Copyright 2016 DCUK Life Ltd.
Decor Clever UK is a trading style of DCUK Life Ltd.
Retford Enterprise Centre, Retford, DN22 7GR
Registration No. 09231776 VAT No. GB202282259
*Available site-wide on all items excluding pre-discounted items or products with another offer applied. Not available in conjunction with any other offer.
Does not include DCUK or Anaglypta brands (these are pre-disocunted. Wallrock items are part of the Anaglypta brand).
Found it cheaper elsewhere? Give us a call.